Shopping Cart
no products

Hydromot

Hydraulic motors convert the output from hydraulic pumps back into usable mechanical work. The speed of a constant motor depends on the oil flow, the torque depends on the operating pressure.
A special design of hydraulic motor is the so-called gerotor motor, which operates like a planetary gear wheel. Gerotormotors are characterized by a large displacement with small dimensions. Hydraulic motors are reversible (suitable for both directions) and can be operated under certain conditions without drain port. The internal check valves guides the inner leakage to low pressure side.
 
Characteristic properties of gerotor motors:
  • Smooth running over the entire speed range
  • Constant operating torque over a wide speed range
  • High starting torque
  • High return pressure without the use of drain line
  • High efficiency
  • Long service life, even in extremely harsh operating conditions
  • Robust and compact design
  • Large radial and axial load
  • Usable in open and in closed hydraulic systems
Hydrauic motors are used in shipbuilding, machine tools, woodworking, wind drives in mining and construction equipment, cranes,... Hydraulic motors are very often found in agricultural and forestry machines, as well as in municipal machinery, like sweepers, spreaders and snow blowers.

 
  

Page:  1  2  3  [>>] 

hydraulic motor cpmm_c front

Hydraulic Motor CPMM_C

  • hydraulic motor CPMM_C
  • selectable displacement: 8.2 ccm/REV – 50 ccm/REV
  • rear ports: G 3/8’’
  • shaft: Ø 16 mm cylindrical with key 5 x 5 x 16
  • spool valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 95,82 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor  cpmm_sh cpmms_c front

Hydraulic Motor CPM_CD

  • hydraulic motor CPM_CD
  • selectable displacement: 36 ccm/REV – 400 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 28
  • 2-hole SAE A flange
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

RRP 113,55 EUR
From only 96,52 EUR

incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor cprmcd front

Hydraulic Motor CPRM_CD

  • hydraulic motor CPRM_CD
  • selectable displacement: 36 ccm/REV – 400 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 28
  • 2-hole SAE A flange
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 127,57 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: upon request upon request Weight: 6,7 kg per

hydraulic motor cprmcd front

Hydraulic Motor CPMH_C

  • hydraulic motor CPMH_C
  • selectable displacement: 160 ccm/REV – 500 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 32 mm cylindrical with key A10 x 8 x 45
  • 4-hole oval flange (magneto flange)
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 192,06 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor gerotor cpmsc front

Hydraulic Motor CPMS_C

  • hydraulic motor CPMS_C
  • selectable displacement: 80 ccm/REV – 475 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 32 mm cylindrical with key A10 x 8 x 45
  • 4-hole SAE flange
  • disc valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 214,36 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor cpmt front

Hydraulic Motor CPMT_C

  • hydraulic motor CPMT_C
  • selectable displacement: 160 ccm/REV – 800 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 391,56 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor cpmt front

Hydraulic Motor CPMV_C

  • hydraulic motor CPMV_C
  • selectable displacement: 315 ccm/REV – 1000 ccm/REV
  • ports: G 1’’
  • shaft: Ø 50 mm cylindrical with key A14 x 9 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 467,63 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor cpmms_c front

Hydraulic Motor CPMMS_C

  • hydraulic motor CPMMS_C
  • selectable displacement: 8.2 ccm/REV – 50 ccm/REV
  • side ports: G 3/8’’
  • shaft: Ø 16 mm cylindrical with key 5 x 5 x 16
  • spool valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces


 


from 95,82 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor  cpmm_sh cpm_cod front

Hydraulic motor CPM_COD

  • hydraulic motor CPM_COD
  • selectable displacement: 36 ccm/REV – 400 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 1’’ (25.4 mm) cylindrical with key
  • 2-hole SAE A flange
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 113,55 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor cprmcod front

Hydraulic Motor CPRM_COD

  • hydraulic motor CPRM_COD
  • selectable displacement: 36 ccm/REV – 400 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 1’’ (25.4 mm) cylindrical with key
  • 2-hole SAE A flange
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 127,57 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days Weight: 6,7 kg per

hydraulic motor cprmcod front

Hydraulic Motor CPMH_CB

  • hydraulic motor CPMH_CB
  • selectable displacement: 160 ccm/REV – 500 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 35 mm cylindrical with key A10 x 8 x 45
  • 4-hole oval flange (magneto flange)
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 197,07 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor gerotor cpmsc front

Hydraulic Motor CPMS_SL

  • hydraulic motor CPMS_SL
  • selectable displacement: 80 ccm/REV – 475 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 34.75 mm P.T.O. DIN9611 Form 1
  • 4-hole SAE flange
  • disc valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 224,46 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor cpmt front

Hydraulic Motor CPMT_SH

  • hydraulic motor CPMT_C
  • selectable displacement: 160 ccm/REV – 800 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 1 1/2’’ splined, 17 T
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 396,61 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

hydraulic motor cpmt front

Hydraulic Motor CPMV_K

  • hydraulic motor CPMV_K
  • selectable displacement: 315 ccm/REV – 1000 ccm/REV
  • ports: G 1’’
  • shaft: conical 1:10 with key B16 x 10 x 32
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 477,79 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days Weight: 31,8 kg per

hydraulic motor  cpmm_sh cpmms_c front

Hydraulic Motor CPMM_SH

  • hydraulic motor CPMM_SH
  • selectable displacement: 8.2 ccm/REV – 50 ccm/REV
  • rear ports: G 3/8’’
  • shaft: Ø 16.5 mm splined B17 x 14
  • spool valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

from 98,24 EUR
incl. 17% tax excl. Shipping costs

Shippingtime: approx. 2-3 days approx. 2-3 days

  

Page:  1  2  3  [>>] 

Show 1 to 15 (from a total of 43 products)