Type H

Gerotor motors are a special form of hydraulic motors, since they function according to the planetary gear systematics. They are reversible and offer large flow with small spacial measurements. This especially applies to the H model range.
For further information please visit our hydraulic guide

Hydraulic Motor M+S MH_C
Hydraulic Motor M+S MH_C
  • hydraulic motor MH_C by M+S
  • selectable displacement: 200 ccm/REV – 500 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 32 mm cylindrical with key A10 x 8 x 45
  • magneto flange 4-hole
  • internal check valve
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimised for small spaces
from 299,50 EUR
incl. 17% tax excl. Shipping costs
Hydraulic Motor M+S HW_R2
Hydraulic Motor M+S HW_R2
  • hydraulic motor HW_R2 by M+S
  • selectable displacement: 125 ccm/REV – 550 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø1 1/4'' conical 1:8 with key 5/16'' x 5/16'' x 1''
  • wheel flange
  • internal check valve
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimised for small spaces
from 406,46 EUR
incl. 17% tax excl. Shipping costs
Hydraulic Motor M+S MH_CB
Hydraulic Motor M+S MH_CB
  • hydraulic motor MH_CB by M+S
  • selectable displacement: 200 ccm/REV – 500 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 35 mm cylindrical with key A10 x 8 x 45
  • magneto flange 4-hole
  • internal check valve
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimised for small spaces
from 311,59 EUR
incl. 17% tax excl. Shipping costs
Hydraulic Motor M+S HW_T2
Hydraulic Motor M+S HW_T2
  • hydraulic motor HW_T2 by M+S
  • selectable displacement: 125 ccm/REV – 550 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø1 1/2'' conical 1:8 with key 5/16'' x 5/16'' x 1 1/4''
  • wheel flange
  • internal check valve
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimised for small spaces
from 408,26 EUR
incl. 17% tax excl. Shipping costs
1 to 4 (from a total of 4)