CPMT Hydraulic motors

Hydraulic motors of the CPMT type are used in belt drives, injection molding machines or winches etc. These hydraulic motors are similar in design to the OMT hydraulic motors by Sauer/Danfoss.
For further information please visit our guide.

Filter
Failed to retrieve the available filter values!
Catalog image1 Hydraulic Motor CPMT160C
Hydraulic Motor CPMT160C
  • hydraulic motor CPMT160C
  • displacement: 160 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT160C motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0001, OMT 160 HYDR.MOTOR ZYL. WELLE           
  • Danfoss, 151B0233, OMT 160 M. 40MM-WELLE             
  • Danfoss, 151B0360, OMT 160 M. 40MM-WELLE S.2      
  • Danfoss, 151B3000, OMT 160  
  • Hydrauliknord, 650-K401, GMT 160      

 
457,97 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT200C
Hydraulic Motor CPMT200C
  • hydraulic motor CPMT200C
  • displacement: 200 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT200C motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0002, OMT 200 HYDR.MOTOR ZYL. WELLE           
  • Danfoss, 151B0201, OMT 200 M. 40MM-WELLE             
  • Danfoss, 151B0361, OMT 200 M. 40MM-WELLE S.2      
  • Danfoss, 151B3001, OMT 200  
  • Hydrauliknord, 650-L401, GMT 200       

 
463,67 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT250C
Hydraulic Motor CPMT250C
  • hydraulic motor CPMT250C
  • displacement: 250 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT250C motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0003, OMT 250 HYDR.MOTOR ZYL. WELLE           
  • Danfoss, 151B0202, OMT 250 M. 40MM-WELLE             
  • Danfoss, 151B0362, OMT 250 M. 40 MM-WELLE S.2     
  • Danfoss, 151B3002, OMT 250  
  • Hydrauliknord, 650-M401, GMT 250     

 
470,80 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT315C
Hydraulic Motor CPMT315C
  • hydraulic motor CPMT315C
  • displacement: 315 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT315C motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0203, OMT 315 M. 40MM-WELLE             
  • Danfoss, 151B0363, OMT 315 40MM-W. S.2    
  • Danfoss, 151B3003, OMT 315  
  • Hydrauliknord, 650-N401, GMT 320      
476,02 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT400C
Hydraulic Motor CPMT400C
  • hydraulic motor CPMT400C
  • displacement: 400 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT400C motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0204, OMT 400 M. 40MM-WELLE             
  • Danfoss, 151B0364, OMT 400 M. 40MM-WELLE S.2      
  • Danfoss, 151B3004, OMT 400  
  • Hydrauliknord, 650-P401, GMT 400      

 
493,11 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT500C
SOLD OUT
Hydraulic Motor CPMT500C
  • hydraulic motor CPMT500C
  • displacement: 500 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT500C motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0193, OMT 500 M. 40MM-WELLE             
  • Danfoss, 151B3005, OMT 500  

 
527,28 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT630C
Hydraulic Motor CPMT630C
  • hydraulic motor CPMT630C
  • displacement: 630 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
542,46 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT800C
Hydraulic Motor CPMT800C
  • hydraulic motor CPMT800C
  • displacement: 800 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
557,64 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT160SH
Hydraulic Motor CPMT160SH
  • hydraulic motor CPMT160SH
  • displacement: 160 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 1 1/2’’ splined, 17 T
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT160SH motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0205, OMT 160 M. VK.-WELLE   
  • Danfoss, 151B3006, OMT 160  
  • Hydrauliknord, 650-K402, GMT 160      

 
462,72 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT200SH
SOLD OUT
Hydraulic Motor CPMT200SH
  • hydraulic motor CPMT200SH
  • displacement: 200 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 1 1/2’’ splined, 17 T
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT200SH motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0036, OMT 200 HYDR.MOTOR VK-WELLE
  • Danfoss, 151B0206, OMT 200 M. VK.-WELLE
  • Danfoss, 151B3007, OMT 200
  • Hydrauliknord, 650-L402, GMT 200
468,42 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT250SH
SOLD OUT
Hydraulic Motor CPMT250SH
  • hydraulic motor CPMT250SH
  • displacement: 250 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 1 1/2’’ splined, 17 T
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT250SH motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0037, OMT 250 M. VK-WELLE     
  • Danfoss, 151B0207, OMT 250 M. VK.-WELLE   
  • Danfoss, 151B3008, OMT 250  
  • Hydrauliknord, 650-M402, GMT 250     
475,55 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT315SH
Hydraulic Motor CPMT315SH
  • hydraulic motor CPMT315SH
  • displacement: 315 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 1 1/2’’ splined, 17 T
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT315SH motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0208, OMT 315 M. VK.-WELLE
  • Danfoss, 151B3009, OMT 315
  • Hydrauliknord, 650-N402, GMT 320
480,77 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT400SH
SOLD OUT
Hydraulic Motor CPMT400SH
  • hydraulic motor CPMT400SH
  • displacement: 400 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 1 1/2’’ splined, 17 T
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT400SH motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0209, OMT 400 M. VK.-WELLE
  • Danfoss, 151B3010, OMT 400
  • Hydrauliknord, 650-P402, GMT 400
497,86 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT500SH
Hydraulic Motor CPMT500SH
  • hydraulic motor CPMT500SH
  • displacement: 500 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 1 1/2’’ splined, 17 T
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT500SH motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0194, OMT 500 M. VK.-WELLE
  • Danfoss, 151B3011, OMT 500
​
532,03 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT630SH
SOLD OUT
Hydraulic Motor CPMT630SH
  • hydraulic motor CPMT630SH
  • displacement: 630 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 1 1/2’’ splined, 17 T
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
547,21 EUR
plus 17% tax
Catalog image1 Hydraulic Motor CPMT800SH
SOLD OUT
Hydraulic Motor CPMT800SH
  • hydraulic motor CPMT800SH
  • displacement: 800 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 1 1/2’’ splined, 17 T
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
562,39 EUR
plus 17% tax
1 to 16 (from a total of 50)