Miscellaneous

In this category you'll find a selection of products for hydraulic and electrial drive systems as well as electrical control systems, sensors and many more. You'll also find products from our remaining stock, some parts are used but 100% functional. For further information please see http://blog.hydromot.lu
Hydraulic Motor with 160 - 200 ccm/REV for Johnston Sweeper
Hydraulic Motor with 160 - 200 ccm/REV for Johnston Sweeper
  • hydraulic motor with 160 or  200 ccm/REV for Johnston Sweeper
  • displacement selectable 160 - 200 ccm/REV
  • ports (side) : G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 32
  • wheel flange with special nose for Johnston sweeper
  • spool valve type
  • internal check valve
  • with high pressure seal kit
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimised for small spaces
186,49 EUR
 
incl. 17% tax excl. Shipping costs
Digital LCD hour meter for off road vehicles, tractors, Type HMSTZ
Digital LCD hour meter for off road vehicles, tractors, Type HMSTZ
  • Digital LCD hour meter for off road vehicles
  • Compact design
  • Operating voltage: 6 - 18 VDC
  • Accuracy ± 1%
20,38 EUR
 
incl. 17% tax excl. Shipping costs
Gear Box P.T.O with Hydraulic Pump (Gear Pump) group 3 selectable displacement
TOP
Gear Box P.T.O with Hydraulic Pump (Gear Pump) group 3 selectable displacement
  • P.T.O. gear box
  • P.T.O. shaft 1 3/8''
  • transmission: 1:3.8
  • size: group 3
  • attached hydraulic pump (gear pump) with selectable displacement from 19 up to 89 ccm/REV
from 223,00 EUR
 
incl. 17% tax excl. Shipping costs
Hydraulic Motor M+S MR160 with seal guard for sweeper brush
Hydraulic Motor M+S MR160 with seal guard for sweeper brush
  • hydraulic motor MR160 by M+S
  • displacement: 160 ccm/REV
  • ports : G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 32
  • seal guard on front flange, eg. for FAUN sweepers
  • oval flange 2-hole SAE A
  • spool valve type
  • internal check valve
  • with high pressure seal kit
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimized for small spaces
212,17 EUR
 
incl. 17% tax excl. Shipping costs
Hydraulic Motor CPMM_C
Hydraulic Motor CPMM_C
  • hydraulic motor CPMM_C
  • selectable displacement: 8.2 ccm/REV – 50 ccm/REV
  • rear ports: G 3/8’’
  • shaft: Ø 16 mm cylindrical with key 5 x 5 x 16
  • spool valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
from 95,82 EUR
 
incl. 17% tax excl. Shipping costs
Hydraulic Motor CPRM_CD
TOP
Hydraulic Motor CPRM_CD
  • hydraulic motor CPRM_CD
  • selectable displacement: 36 ccm/REV – 400 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 28
  • 2-hole SAE A flange
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
from 127,57 EUR
 
incl. 17% tax excl. Shipping costs
Gear Box P.T.O / Gear Pump group 2 selectable displacement
Gear Box P.T.O / Gear Pump group 2 selectable displacement
  • P.T.O. gear box
  • P.T.O. shaft 1 3/8''
  • transmission: 1:3.8
  • size: group 2
  • attached hydraulic pump (gear pump) with selectable displacement from 4 up to 28 ccm/REV
from 138,00 EUR
 
incl. 17% tax excl. Shipping costs
Hydraulic Motor CPMV_C
Hydraulic Motor CPMV_C
  • hydraulic motor CPMV_C
  • selectable displacement: 315 ccm/REV – 1000 ccm/REV
  • ports: G 1’’
  • shaft: Ø 50 mm cylindrical with key A14 x 9 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
  • Applications: log splitter, drilling maschines
from 467,63 EUR
 
incl. 17% tax excl. Shipping costs
Gear Box hollow shaft with Hydraulic Pump (Gear Pump) group 3 selectable displacement
Gear Box hollow shaft with Hydraulic Pump (Gear Pump) group 3 selectable displacement
  • P.T.O. gear box
  • Hollow shaft with snap ring 1 3/8''
  • ratio i=1:3.8
  • size: group 3
  • attached hydraulic pump (gear pump) with selectable displacement from 19 up to 89 ccm/REV
from 264,15 EUR
 
incl. 17% tax excl. Shipping costs
Hydraulic Motor M+S MR160 with seal guard for sweeper brush, splined shaft
Hydraulic Motor M+S MR160 with seal guard for sweeper brush, splined shaft
  • hydraulic motor MR160 by M+S
  • displacement: 160 ccm/REV
  • ports : G 1/2’’
  • shaft:  Ø 25,32 mm splined (SAE 6B)
  • seal guard on front flange, eg. for FAUN sweepers
  • oval flange 2-hole SAE A
  • spool valve type
  • internal check valve
  • with high pressure seal kit
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimized for small spaces
221,93 EUR
 
incl. 17% tax excl. Shipping costs
Hydraulic Motor CPMMS_C
Hydraulic Motor CPMMS_C
  • hydraulic motor CPMMS_C
  • selectable displacement: 8.2 ccm/REV – 50 ccm/REV
  • side ports: G 3/8’’
  • shaft: Ø 16 mm cylindrical with key 5 x 5 x 16
  • spool valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces


 

from 95,82 EUR
 
incl. 17% tax excl. Shipping costs
Hydraulic valve, Flow Control Valve for CPM and CPRM Hydraulic Motor
TOP
Hydraulic valve, Flow Control Valve for CPM and CPRM Hydraulic Motor
  • flow control valve, flangeable to CPM and CPRM
  • max. flow: 60 l/min
  • valve is limiting the oil flow for attachment systems like attachment sweepers
  • valve protects the motor from high oil flow
  • max. pressure: 350 bar
  • connections: G 1/2’’
  • adjustment range: 1 - 50 litre
107,43 EUR
 
incl. 17% tax excl. Shipping costs
Gear Box Hollow Shaft with Snap Ring with Hydraulic Pump (Gear Pump) group 2 selectable displacement
Gear Box Hollow Shaft with Snap Ring with Hydraulic Pump (Gear Pump) group 2 selectable displacement
  • P.T.O. gear box
  • Hollow P.T.O. shaft 1 3/8'' with snap ring
  • transmission: 1:3.8
  • size: group 2
  • attached hydraulic pump (gear pump) with selectable displacement from 4 up to 28 ccm/REV
184,40 EUR
 
incl. 17% tax excl. Shipping costs
Hydraulic Speed Reducer - Type 5710
Hydraulic Speed Reducer - Type 5710
  • Alternative to Berma RT190
  • Torque 1900 Nm
  • Ratio: 1:10.2
  • Input: hydraulic motor with shaft 25 mm, SAE A flange (e.g. CPRM)
  • sturdy design of cast iron
  • higher torque with simple gerotor motor
  • gear box oil recommendation: SAE 80W-90, 2 liters
566,87 EUR
 
incl. 17% tax excl. Shipping costs
Lever Valve, 80 Liter, Spring Centered, 1 Section, with Pressure Relief Valve PRV 63 to 200 bar
Lever Valve, 80 Liter, Spring Centered, 1 Section, with Pressure Relief Valve PRV 63 to 200 bar
  • monoblock valve
  • 80 l/min
  • 1 section
  • connections A&B: G 3/4’’
  • double acting
  • spring centered
  • pressureless flow in neutral position
  • max. working pressure: 315 bar
  • incl. pressure relief valve
  • pressure relief valve adjustable from 63 bar – 200 bar (standard: 120 bar)
146,00 EUR
 
incl. 17% tax excl. Shipping costs
Show 1 to 15 (from a total of 21 products)