Thread tap

Tap and Die Set | M2 - M18 | 110 pcs
Tap and Die Set | M2 - M18 | 110 pcs
  • especially for fine threads
  • 2 die holders
  • 2 tap holders
  • 1 T-holder for taps
  • 35 taps (starter and plug tap for each size) and dies in following sizes
    M2 x 0.4 - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M6 x 0.75 - M7 x 1.0 - M7 x 0.75 - M8 x 0.75 - M8 x 1.0 - M8 x 1.25 - M9 x 0.75 - M9 x 1.0 - M9 x 1.25 - M10 x 0.75 - M10 x 1.0 - M10 x 1.25 - M10 x 1.5 - M11 x 0.75 - M11 x 1.0 - M11 x 1.25 - M11 x 1.5 - M12 x 0.75 - M12 x 1.0 - M12 x 1.25 - M12 x 1.5 - M12 x 1.75 - M14 x 1.0 - M14 x 1.25 - M14 x 1.5 -
    M14 x 2.0 - M16 x 1.0 - M16 x 1.5 - M16 x 2.0 - M18 x 1.5
  • in a plastic case
217,20 EUR
 
incl. 17% tax excl. Shipping costs
Tap and Die Set | Inch Sizes | 1/4" - 1" | 45 pcs.
Tap and Die Set | Inch Sizes | 1/4" - 1" | 45 pcs.
  • imperial sizes
  • 20 taps for internal threads and 20 dies for external threads (one each size):
    • fine threads: 1/4" NF28 - 5/16" NF24 - 3/8" NF24 - 7/16" NF20 - 1/2" NF20 - 9/16" NF18 - 5/8" NF18 - 3/4" NF16 - 7/8" NF14 - 1" NF14
    • rough threads: 1/4" NC20 - 5/16" NC18 - 3/8" NC16 - 7/16" NC14 - 1/2" NC13 - 9/16" NC12 - 5/8" NC11 - 3/4" NC10 - 7/8" NC9 - 1" NC8
  • 1 adjustable tap wrench
  • 1 die holder
  • 1 tap holder
  • 1 adaptor for die holder
  • 1 screwdriver, slot drive 6 mm
  • in a plastic case
168,73 EUR
 
incl. 17% tax excl. Shipping costs
Show 1 to 2 (from a total of 2 products)