Buy cheap hydraulic components in our hydraulic shop!

Solenoid valve, 2/2 way seat valve, Hydraulic valve, Normally closed, Ports G 3/8

Solenoid valve, 2/2 way seat valve, Hydraulic...

2/2 way seat valve, normally closed
Cartridge from VIS Hydraulics (Italy)
Connection: 3/8‘‘, tube fitting
Body: aluminium
max. pressure: 250 bar
Max. flow rate: 40 l/min
various supply voltages available

83,44 EUR

Hydraulic Power Pack, 2.2 kW, 400 Volt, 10 liter oil reservoir (steel), 5.8 ccm/REV gear pump, for 3 double acting users

Hydraulic Power Pack, 2.2 kW, 400 Volt,...

Hydraulic power pack with the following features:

Gear pump with 5.8 ccm/REV (equal about 8.7 l/min)
Max. working pressure: PRV adjusted to 160 bar
Hydraulic reservoir (steel reservoir) 10 liter
Horizontal assembly
Suction filter
With pressure gauge 0-250 bar
With 3 pieces 4/3-way solenoid valve (24 Volt) for 3 double acting users
Electrical motor: Three phase electrical motor, 400 Volt, 50Hz, 2,2kW, B14

645,02 EUR

Diaphragm accumulator 0,16 - 2,8 liter, 330 bar, female thread G1/2

Diaphragm accumulator 0,16 - 2,8 liter, 330...

Diaphragm accumulator
max. pressure range 330 bar
Temperature range -15°C to +80°C
Connection: female thread G1/2" (up to nominal volume1.4 liter), G3/4" from nominal volume 2 liter
Gas connection M28 x 1,5
Without gas filling (please tell us on order, max. filling pressure 160 bar)

from 80,60 EUR

Quick Coupling, Set, Male and Female Parts with dust protection cap

Quick Coupling, Set, Male and Female Parts...

quick coupling set, female and male parts
double acting sleeve (PUSH/PULL)
size 3
thread: 1/2‘‘ female
max. working pressure: 275 bar
working temperature range: -25°C to +100°C
NBR seal
included Dust protection

15,60 EUR

Hydraulic fuel power pack 4.8kw, 6.5PS, selectable displacement: 3, 5.1 or 6.1 ccm/Rev

Hydraulic fuel power pack 4.8kw, 6.5PS, selectable...

Hydraulic fuel power pack, pump size of 3.0 ccm/Rev, 5.1 ccm/Rev or 6.1 ccm/Rev selectable as standard
power 4,8KW / 6,5PS
max speed 3600 rpm
economical in consumption
Suction and pressure connection 3/8 inch female thread
3 ccm/Rev results in a max. flow rate of approx. 10.8 L/min and a max. pressure of 225bar
5.1 ccm/Rev results in a max. flow rate of approx. 18.3 L/min and a max. pressure of 145bar
6.1 ccm/Rev results in a max. flow rate of approx. 22 L/min and a max. pressure 115bar

299,01 EUR

Hydraulic Motor CPRM_CD

Hydraulic Motor CPRM_CD

hydraulic motor CPRM_CD
selectable displacement: 36 ccm/REV – 400 ccm/REV
ports: G 1/2’’
shaft: Ø 25 mm cylindrical with key A8 x 7 x 28
2-hole SAE A flange
spool valve type
internal check valve
incl. high pressure seal up to 150 bar
usage without drain line possible
OEM quality
optimized for small spaces

from 127,57 EUR

Solenoid Valve, Cetop 3, 3C2, A-B-P-T closed

Solenoid Valve, Cetop 3, 3C2, A-B-P-T closed...

4/3-way solenoid valve
scheme: A-B-P-T closed
direct controlled
for modular assembly
max. pressure: 315 bar
spool voltage: 12V DC, 24V DC or 230V AC
Qmax.: see diagram in our catalogue

60,99 EUR

Switch Over Valve, 6/2 Way, 1/2

Switch Over Valve, 6/2 Way, 1/2", 60 Liter/min...

6/2-way switch over valve
Connection: 1/2‘‘
max. pressure: 210 bar
various supply voltages available
Qmax.: 60 l/min

71,42 EUR

Hydraulic Motor M+S TMF

Hydraulic Motor M+S TMF

hydraulic motor TMF by M+S
selectable displacement: 200 ccm/REV – 725 ccm/REV
ports: G 3/4’’
sheave: 5 x M12 x 1,5 on Ø 140 mm
internal check valve
drain line necessary
OEM quality, made in Europe
optimised for small spaces

from 738,64 EUR

Suction filter, in line mounting, Qmax. 32 lpm, 25 µm abs., Type MPS-100

Suction filter, in line mounting, Qmax. 32...

Suction filter, in line mounting
Max. flow 32 lpm
Filter element: Inorganic microfibre 25 µm abs.
Max. working pressure: 12 bar

88,90 EUR