Sweepers

We supply hydraulic motors and other components for sweepers like e.g. Faun, Johnston, Brock, Scarab, Bucher, Bema and more.
For further information please see buyer's guide

Hydraulic Motor with 160 - 200 ccm/REV for Johnston Sweeper
SOLD OUT
Hydraulic Motor with 160 - 200 ccm/REV for Johnston Sweeper
  • hydraulic motor with 160 or  200 ccm/REV for Johnston Sweeper
  • displacement selectable 160 - 200 ccm/REV
  • ports (side) : G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 32
  • wheel flange with special nose for Johnston sweeper
  • spool valve type
  • internal check valve
  • with high pressure seal kit
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimised for small spaces
196,99 EUR
plus 17% tax
Hydraulic Motor M+S MR160 with seal guard for sweeper brush
SOLD OUT
Hydraulic Motor M+S MR160 with seal guard for sweeper brush
  • hydraulic motor MR160 by M+S
  • displacement: 160 ccm/REV
  • ports : G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 32
  • seal guard on front flange, eg. for FAUN sweepers
  • oval flange 2-hole SAE A
  • spool valve type
  • internal check valve
  • with high pressure seal kit
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimized for small spaces
224,11 EUR
plus 17% tax
Hydraulic Motor M+S MR160 with seal guard for sweeper brush, splined shaft
SOLD OUT
Hydraulic Motor M+S MR160 with seal guard for sweeper brush, splined shaft
  • hydraulic motor MR160 by M+S
  • displacement: 160 ccm/REV
  • ports : G 1/2’’
  • shaft:  Ø 25,32 mm splined (SAE 6B)
  • seal guard on front flange, eg. for FAUN sweepers
  • oval flange 2-hole SAE A
  • spool valve type
  • internal check valve
  • with high pressure seal kit
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimized for small spaces
234,41 EUR
plus 17% tax
Hydraulikmotor MS MPW KD front
SOLD OUT
Hydraulic Motor for JCB and Brock Sweeper
  • hydraulic motor for JCB or Brock sweeper
  • displacement: 200 ccm/REV
  • ports (side) : G 1/2’’
  • shaft: conical 1:10 with key B5 x 5 x 14
  • with radial needle bearing
  • wheel flange
  • spool valve type
  • internal check valve
  • with high pressure seal kit
  • usage without drain line possible
  • OEM quality, made in Europe
  • optimised for small spaces
249,36 EUR
plus 17% tax
flow control valve hydraulic motor front
Hydraulic valve, Flow Control Valve for CPM and CPRM Hydraulic Motor
  • flow control valve, flangeable to CPM and CPRM
  • max. flow: 60 l/min
  • valve is limiting the oil flow for attachment systems like attachment sweepers
  • valve protects the motor from high oil flow
  • max. pressure: 350 bar
  • connections: G 1/2’’
  • adjustment range: 1 - 50 litre
Scheme Hydraulic valve, Flow Control Valve for CPM and CPRM Hydraulic Motor
108,08 EUR
plus 17% tax
1 to 5 (from a total of 5)